+7 (921) 55-77-130 info@grs-spb.ru СПб 8:00 — 20:00 (Пн — Вс)
Генеральный Холодильный Сервис
Ремонт и обслуживание чиллеров
Компрессор Sabroe SMC116 — запчасти, ремонт, схемы, сервисное обслуживание.
Компрессор Sabroe SMC116 - запчасти, ремонт, схемы, сервисное обслуживание
Компрессор Sabroe SMC116 — запчасти, ремонт, сервисное обслуживание.
| Type S-L and E | ||||||
| Relevant drawings lor compressor | SMC | TSMC | ||||
| SMC 100 Mk 3, S-L-E (delivered after 89.10) | 0661-523 | 0661-524 | ||||
| Cylinder liner ect. SMC-TSMC 112, 116 Mk3 (after 89.10) | 0661-525 | |||||
| SMC 100 Mk3 | 0661-757 | 0661-758 | ||||
| Cylinder liner ect. SMC — TSMC 100 Mk3 | 0661-605 | |||||
| *) If the compressor runs as heat pump, this must be mentioned when ordering, to ensure a correct delivery | ||||||
| Pos- | Designation | Weight each in kg | Number each compressor | Part No | ||
| SMC 112 | SMC 116 | TSMC 116 | ||||
| Compressor frame | ||||||
| 1A-1 | Frame SMC 112 | 572.000 | 1 | 3111-071 | ||
| 1A-2 | Frame SMC 116 | 560.000 | 1 | 3111-069 | ||
| 1A-3 | Frame TSMC 116 | 560.000 | 1 | 3111-070 | ||
| 1B-1 | Oil level glass dia. 80 | 0.230 | 2 | 2 | 2 | 1226-015 |
| 1C-1 | O-ring PRP 137-52,07x 2,62*) | 0.002 | 2 | 2 | 2 | 1331-140 |
| 1D-1 | Hexagon head M6 x 18 | 0.010 | 8 | 8 | 8 | 1424-148 |
| 1E-1 | Intermediate flange | 0.010 | 1 | 1 | 1 | 2333-053 |
| Top cover — air cooled | ||||||
| 2A-1 | Top cover S-L | 19.000 | 6 | 8 | 7 | 3113-191 |
| 2A-2 | Top cover with flange S-L | 20.500 | 1 | 3113-192 | ||
| 2A-3 | Top cover E | 19.000 | 6 | 8 | 7 | 3113-177 |
| 2A-4 | Top cover with flange E | 20.500 | 1 | 3113-176 | ||
| 2C-1 | Gasket for top cover | 0.020 | 6 | 8 | 8 | 2353-151 |
| 2E-1 | Hexagon head M14 x 90 | 0.120 | 96 | 128 | 128 | 1424-083 |
| 2F-1 | Hexagon head M14 x 12C | 0.165 | 2 | 1424-090 | ||
| 2G-1 | Washer for M14 dia. 28/15 x 2,5 | 0.010 | 96 | 128 | 128 | 1436-037 |
| Pos- | Designation | Weight each in kg | Number each compressor | Part No | ||
| SMC 112 | SMC 116 | TSMC 116 | ||||
| Top cover — water cooled (see sketch below) | ||||||
| 2A-1 | Top covers S-L | 19.000 | 6 | 8 | 7 | 3113-191 |
| 2A-2 | Top cover with flange S-L | 20.500 | 1 | 3113-192 | ||
| 2A-3 | Top cover E | 19.000 | 6 | 8 | 7 | 3113-177 |
| 2A-4 | Top cover with flange E | 20.500 | 1 | 3113-176 | ||
| 2B-1 | Water cover for cover with flange | 5.800 | 1 | 3113-195 | ||
| 2B-2 | Water cover left | 5.800 | 3 | 4 | 4 | 3113-193 |
| 2B-3 | Water cover right | 5.800 | 3 | 4 | 3 | 3113-194 |
| 2C-1 | Gasket for top cover | 0.020 | 6 | 8 | 8 | 2353-151 |
| 2D-1 | Gasket for water cover pos. 2B-1 | 0.020 | 1 | 2353-176 | ||
| 2D-2 | Gasket for water cover pos. 2B-2/2B-3 | 0.020 | 6 | 8 | 7 | 2353-175 |
| 2E-2 | Hexagon head screw M14 x 110 | 0.150 | 96 | 128 | 128 | 1424-087 |
| 2F-1 | Hexagon head screw M14 x 120 | 0.165 | 2 | 1424-090 | ||
| 2G-1 | Washer for M14, dia. 28/15 x 2,5 | 0.010 | 96 | 128 | 128 | 1436-037 |
| 2H-1 | Hexagon head screw M10 x 35 | 0.050 | 12 | 16 | 16 | 1424-193 |
| 2J-1 | Washer for M 10, dia. 21 /10,5 x 2 | 0.008 | 12 | 16 | 16 | 1436-035 |
| Side cover — air cooled | ||||||
| 3A-1 | Side cover | 10.900 | 4 | 4 | 4 | 3113-148 |
| 3C-1 | Gasket for side cover | 0.020 | 4 | 4 | 4 | 2353-151 |
| 3E-1 | Hexagon head screw M14 x 65 | 0.045 | 64 | 64 | 64 | 1424-246 |
| 3G-1 | Washer for M14, dia. 28/15 x 2,5 | 0.010 | 64 | 64 | 64 | 1436-037 |
| Side cover — water cooled | ||||||
| 3A-2 | Side cover with cooling fins | 15.000 | 4 | 4 | 4 | 3113-140 |
| 3B-1 | Water cover | 5.800 | 4 | 4 | 4 | 3113-138 |
| 3C-1 | Gasket for side cover | 0.020 | 4 | 4 | 4 | 2353-151 |
| 3D-1 | Gasket for water cover | 0.020 | 4 | 4 | 4 | 2353-154 |
| 3E-2 | Hexagon head screw M14 x 55 | 0.065 | 56 | 56 | 56 | 1424-244 |
| 3F-1 | Hexagon head screw M14 x 35 | 0.045 | 8 | 8 | 8 | 1424-240 |
| 3G-1 | Washer for M14, dia. 28/15 x 2.5 | 0.010 | 64 | 64 | 64 | 1436-037 |
| 3H-1 | Hexagon head screw M12 x 40 | 0.050 | 4 | 4 | 4 | 1424-217 |
| 3J-1 | Washer for M12, dia. 24/13 x 2,5 | 0.008 | 4 | 4 | 4 | 1436-036 |
| End cover at pump end | ||||||
| 4A-1 | End cover | 17.950 | 1 | 1 | 1 | 3113-028 |
| 4B-1 | Gasket | 0.020 | 1 | 1 | 1 | 2353-011 |
| 4C-1 | Hexagon head screw M14 x 100 | 0.150 | 14 | 14 | 14 | 1424-085 |
| 4D-1 | Washer for M14 dia. 28/15 x 2,5 | 0.010 | 14 | 14 | 14 | 1436-037 |
| Bearing cover at pump end | ||||||
| 5A-1 | Bearing cover | 9.100 | 1 | 1 | 1 | 3113-031 |
| 5B-1 | Hexagon head screw M14 x 35 | 0.055 | 6 | 6 | 6 | 1424-240 |
| 5C-1 | Bushing | 1.200 | 1 | 1 | 1 | 2132-021 |
| 5C-2 | Bushing for repair (0,5 mm undersize) | 1.220 | 1 | 1 | 1 | 2132-022 |
| 5D-1 | Gasket — 0,3 mm | 0.005 | 1 | 1 | 1 | 2353-013 |
| 5D-2 | Gasket — 0,5 mm | 0.006 | 1 | 1 | 1 | 2353-100 |
| 5D-3 | Gasket — 0,75 mm | 0.010 | 1 | 1 | 1 | 2353-014 |
| 5D-4 | Gasket -1,0 mm | 0.015 | 1 | 1 | 1 | 2353-015 |
| Bearing cover at shaft seal end | ||||||
| 6A-1 | Bearing cover | 23.000 | 1 | 1 | 1 | 3113-124 |
| 6B-1 | Hexagon head screw M14 x 60 | 0.085 | 14 | 14 | 14 | 1424-245 |
| 6C-3 | Bushing | 1.200 | 1 | 1 | 1 | 2132-021 |
| 6C-4 | Bushing for repair (0,5 mm undersize) | 1.200 | 1 | 1 | 1 | 2132-022 |
| 6D-1 | Gasket | 0.020 | 1 | 1 | 1 | 2353-011 |
| 6E-1 | Washer for M14, dia. 28/15 x 2,5 | 0.010 | 14 | 14 | 14 | 1436-037 |
| 6F | Valve for prelubrication | 1 | 1 | 1 | 2412-585 | |
| 6G | Nut | 1 | 1 | 1 | 2313-045 | |
| 6H | Special joint | 1 | 1 | 1 | 2334-027 | |
| 6J | Cap | 1 | 1 | 1 | 2313-027 | |
| 6K | Joint 3/8″ | 1 | 1 | 1 | 1349-053 | |
| 6L | Alu gasket | 1 | 1 | 1 | 2356-123 | |
| Shaft seal type SB100 Revision 1 for compressor nos. up to 98379 | ||||||
| Spare parts kit: | 1 | 1 | 1 | 3184-225 | ||
| Consist of: — see Revision 3 | ||||||
| Revision 2 for compressor nos. after 98379 incl. | ||||||
| Spare parts kit: | 1 | 1 | 1 | 3126-178 | ||
| 10E-2 | Consist of: Slide ring, steel | 1 | 1 | 1 | ||
| 10F-1 | Slide ring, carbon | 1 | 1 | 1 | ||
| 10D-1 | O-ring dia. 75,79 x 3,53 | 1 | 1 | 1 | ||
| 10G-2 | Sealing ring | 1 | 1 | 1 | ||
| 10J-1 | Hex. socket screw M5 x 16 | 4 | 4 | 4 | ||
| 13 | Allen key — NV 4 x 90 x 90 | 1 | 1 | 1 | ||
| 8B-1 | Gasket for cover | 1 | 1 | 1 | ||
| Mounting instruction | 0171-934 | |||||
| Revision 3 | ||||||
| Spare parts kit: | 1 | 1 | 1 | 3184-225 | ||
| 10E-1 | Consist of: Slide ring, steel | 1 | 1 | 1 | ||
| 10F-1 | Slide ring, carbon | 1 | 1 | 1 | ||
| 10D-1 | O-ring dia. 75,79 x 3,53 | 1 | 1 | 1 | ||
| 10G-1 | O-ring dia. 82,14×3,53 | 1 | 1 | 1 | ||
| 10J-1 | Hex. socket screw M5 x 16 | 4 | 4 | 4 | ||
| 13 | Alien key — NV 4 x 90 x 90 | 1 | 1 | 1 | ||
| 8B-1 | Gasket for cover | 1 | 1 | 1 | ||
| Mounting instruction | 0171-930 | |||||
| Shaft seal complete: SMC/TSMC 100 | 1 | 1 | 1 | 3184-226 | ||
| Consist of: | ||||||
| 8A-2 | Cover (SMC/TSMC 100) | 1 | 1 | 1 | 3113-175 | |
| 8B-1 | Gasket for cover | 1 | 1 | 1 | 2353-005 | |
| 8C-1 | Hex. head screw M10 x 40 — DIN 933 | 6 | 6 | 6 | 1424-194 | |
| Allen key — NV 4 x 90 x 90 | 1 | 1 | 1 | 1612-392 | ||
| 8D-1 | Hose connection 1/4″ | 1 | 1 | 1 | 1345-143 | |
| 8E-1 | PVC hose 3/16″ x 400 | 1241-190 | ||||
| 8F-1 | Spirolox ring dia. 76 | 1 | 1 | 1 | 1437-295 | |
| 8G-1 | Lock spring | 1 | 1 | 1 | 3126-169 | |
| 8H-1 | Groover pin dia. 4 x 20 | 1 | 1 | 1 | 1446-081 | |
| 10A-1 | Retaining flange | 1 | 1 | 1 | 3126-166 | |
| 10B-1 | Spring | 10 | 10 | 10 | 2142-058 | |
| 10D-1 | O-ring dia. 75,79 x 3,53 | 1 | 1 | 1 | 1331-075 | |
| 10E-2 | Slide ring, steel | 1 | 1 | 1 | 3126-167 | |
| 10F-1 | Slide ring, carbon | 1 | 1 | 1 | 3126-168 | |
| 10G-1 | O-ring dia. 82,14 x 3,53 | 1 | 1 | 1 | 1331-077 | |
| 10H-1 | Locking ring | 1 | 1 | 1 | 3126-153 | |
| 10J-1 | Hex. socket screw M5 x 16 | 4 | 4 | 4 | 1413-329 | |
| Oil pump | ||||||
| 11-1 | Oil pump complete | 2.400 | 1 | 1 | 1 | 3141-004 |
| Contains: | ||||||
| -Oil pump | ||||||
| 11J-Lock nut, M10x 10,7 | ||||||
| 11L — Washer for M10 dia. 21/10,5 x 2 | ||||||
| 11N-Key 5 x 5 x 12 | ||||||
| 11P-Gasket dia. 32/27×1,5 | ||||||
| 11S — Threaded nipple | ||||||
| 11G-1 | Gear whell for pump pinion | 0.660 | 1 | 1 | 1 | 3141-046 |
| 11H-1 | Gear wheel for crank shaft | 0.530 | 1 | 1 | 1 | 3141-047 |
| 11M-1 | Hexagon head screw M6 x 25 | 0.010 | 4 | 4 | 4 | 1424-153 |
| 11Q-1 | Hexagon head screw M12 x 30 | 0.040 | 2 | 2 | 2 | 1424-215 |
| 11R-1 | Spring washer dia. 12 | 0.002 | 2 | 2 | 2 | 1437-081 |
| 11T-1 | Spring washer- dia. 11,1/6,1 x 1.6 | 0.005 | 4 | 4 | 4 | 1437-022 |
| Unloading cylinder | ||||||
| 12-1 | Unloading cylinder Complete L=75, S=21,5 | 1.765 | 1 | 1 | 1 | 3135-149 |
| 12-2 | Unloading cylinder Complete L=100, S=46,5 | 1.790 | 1 | 1 | 1 | 3135-150 |
| 12-3 | Unloading cylinder Complete L=125, 8=71,5 | 1.815 | 1 | 1 | 3135-151 | |
| 12-4 | Unloading cylinder Complete L=150, S=96,5 | 1.840 | 1 | 3135-152 | ||
| 12-5 | Unloading cylinder (HP) Complete L=82, S=24,5 | 1.800 | 3135-161 | |||
| 12A-1 | Unloading cylinder (SMC and TSMC LP) | 1.700 | 2 | 3 | 4 | 3135-147 |
| 12A-2 | Unloading cylinder (TSMC HP) | 1.800 | 3135-148 | |||
| 12B-1 | Piston | 0.220 | 2 | 3 | 4 | 3135-034 |
| 12C-1 | Piston rod 75 mm (SMC only) | 0.065 | 1 | 1 | 1 | 3135-041 |
| 12C-2 | Piston rod 100 mm | 0.090 | 1 | 1 | 1 | 3135-042 |
| 12C-3 | Piston rod 125 mm | 0.115 | 1 | 1 | 3135-043 | |
| 12C-4 | Piston rod 150 mm | 0.140 | 1 | 3135-044 | ||
| 12C-5 | Piston rod 82 mm, grounded (TSMC HP only) | 0.090 | 3135-140 | |||
| 12D-1 | Threaded plug — 3/8″ BSP | 0.065 | 2 | 3 | 4 | 2314-025 |
| 12E-1 | Gasket — dia. 25/17×1,5 | 0.002 | 2 | 3 | 4 | 2356-130 |
| 12F-1 | Seeger ring dia. 52 (SMCandTSMCLP) | 0.008 | 2 | 3 | 4 | 1437-155 |
| 12G-1 | Spring guide | 0.040 | 2 | 3 | 4 | 2145-004 |
| 12H-1 | Spring retainer (SMC and TSMC LP) | 0.110 | 2 | 3 | 4 | 3135-057 |
| 12J-1 | Spring (outer) | 0.065 | 2 | 2 | 4 | 2142-056 |
| 12J-2 | Spring (inner) | 0.035 | 2 | 3 | 4 | 2142-055 |
| 12K-1 | Benzing ring — dia. 9 mm | 0.002 | 2 | 3 | 4 | 1437-105 |
| 12K-2 | Benzing ring — dia. 7 mm (SMCandTSMCLP) | 0.001 | 2 | 3 | 4 | 1437-103 |
| 12L-1 | Hexagon head screw M10 x 30 | 0.030 | 8 | 12 | 16 | 1424-192 |
| 12M-1 | Cover (TSMC HP only) | 0.800 | 1 | 3135-105 | ||
| 12N-1 | Gasket for cover (TSMC HP only) | 0.010 | 1 | 2353-025 | ||
| 12P-1 | Look nut — UNF 3/8″ (TSMC HP only) | 0.010 | 1 | 1433-100 | ||
| 12Q-1 | Socket cap screw M4 x 16 (TSMC HP only) | 0.010 | 6 | 1413-007 | ||
| 12R-1 | O-ring PRP 112 12,37×2.62 (TSMC HP only)*) | 0.001 | 1 | 1331-013 | ||
| 12S-1 | Gasket 100 x 100 x 2 | 0.010 | 8 | 8 | 8 | 2354-023 |
| Frame for unloading mechanism | ||||||
| Frame complete incl. pos. 13E-1 | 3184-216 | |||||
| 13A-1 | Suspension rod | 0.290 | 6 | 8 | 8 | |
| 13B-1 | Suspension rod | 0.290 | 6 | 8 | 8 | |
| 13C-1 | Cross piece | 0.330 | 6 | 8 | 8 | |
| 13D-1 | Cross piece | 0.330 | 6 | 8 | 8 | |
| 13E-1 | Countersunk screw M6 x 16 | 0.020 | 24 | 32 | 32 | 1413-092 |
| Bracket for unloading mechanism | ||||||
| 14A-1 | Bracket with pin | 0.065 | 12 | 16 | 14 | 3135-060 |
| 14B-1 | Spacing ring | 0.005 | 24 | 32 | 28 | 2124-003 |
| 14C-1 | Hexagon head screw M6 x 30 | 0.010 | 24 | 32 | 28 | 1424-154 |
| 14D-1 | Spring washer — dia. 6 | 0.005 | 24 | 32 | 28 | 1437-022 |
| Rocker for unloading mechanism | ||||||
| 15A-1 | Rocker | 0.050 | 24 | 32 | 32 | 3135-096 |
| 15B-1 | Bearing for SMC and TSMC LP | 0.006 | 24 | 32 | 24 | 3135-099 |
| 15B-2 | Bearing for TSMC HP | 0.006 | 8 | 3135-101 | ||
| 15C-1 | Spring retainer | 0.001 | 24 | 32 | 32 | 2145-001 |
| 15D-1 | Spring | 0.007 | 24 | 32 | 32 | 2142-061 |
| 15E-1 | Washer for bearing cup — 0,5 mm | 0.001 | 2114-003 | |||
| Crankshaft — all without certificate | ||||||
| 16A-7 | Crankshaft for SMC 112S, complete | 88.800 | 1 | 3121-022 | ||
| 16A-8 | Crankshaft for SMC 116S and TSMC 116S, complete | 91.400 | 1 | 1 | 3121-023 | |
| 16A-9 | Crankshaft for SMC 112L, complete | 92.000 | 1 | 3121-107 | ||
| 16A-10 | Crankshaft for SMC 116L and TSMC 116L, complete | 100.400 | 1 | 1 | 3121-108 | |
| 16A-14 | Crankshaft for SMC 112E, complete | 1 | 3121-216 | |||
| 16A-15 | Crankshaft for SMC 116E and TSMC 116E, complete | 1 | 1 | 3121-217 | ||
| 16B-1 | Plain washer with pin | 0.800 | 1 | 1 | 1 | 2125-084 |
| 16C-1 | Key-18 x 11x 55 | 0.080 | 1 | 1 | 1 | 2123-005 |
| 16D-1 | Hexagon head screw M16 x 55 | 0.050 | 1 | 1 | 1 | 1424-104 |
| 16E-1 | Spring washer — dia. 16 | 0.004 | 1 | 1 | 1 | 1437-027 |
| 16F-1 | Plug M 12 S-type | 0.010 | 4 | 4 | 4 | 1413-260 |
| 16F-2 | Plug 1/4″L-type | 0.010 | 4 | 5 | 5 | 1343-141 |
| Connecting rod | ||||||
| 17-1 | Connecting rod, complete SMC and TSMC LP | 2.300 | 12 | 16 | 12 | 3123-004 |
| 17-2 | Connecting rod. completeTSMC HP | 2.700 | 4 | 3123-006 | ||
| 17A-1 | Half-section of bearing | 0.080 | 24 | 32 | 32 | 2133-003 |
| 17A-2 | Half-section of bearing (0,5 mm undersize) | 0.080 | 24 | 32 | 32 | 2133-004 |
| 17B-1 | Bushing for piston pin SMC and TSMC LP | 0.200 | 12 | 16 | 12 | 2132-004 |
| 17B-2 | Needle bearing TSMC HP | 0.200 | 4 | 1511-275 | ||
| 17C-1 | Bolt for connecting rod | 0.055 | 24 | 32 | 32 | 2111-068 |
| 17D-1 | Lock nut — 3/8″ UNF | 0.010 | 24 | 32 | 32 | 1433-116 |
| Piston with pin and rings | ||||||
| 18-1 | Piston with pin and rings S | 1.320 | 12 | 16 | 16 | 3124-002 |
| 18-2 | Piston with pin and rings L | 1.320 | 12 | 16 | 16 | 3124-052 |
| 18-3 | Piston with pin and rings E | 1.320 | 12 | 16 | 16 | 3124-065 |
| 18A-1 | Piston pin | 0.500 | 12 | 16 | 16 | 3125-084 |
| 18B-1 | Piston ring | 0.025 | 24 | 32 | 32 | 3125-130 |
| 18C-1 | Oil scraper rings | 0.030 | 12 | 16 | 16 | 3125-065 |
| 18D-1 | Seeger-ring — dia. 40 (inside diameter) | 0.005 | 24 | 32 | 32 | 1437-150 |
| Cylinder liner with sction valve | ||||||
| 19-1 | Cylinder liner with suction valve R717, SMC — TSMC LP, S and L | 4.100 | 12 | 16 | 12 | 3112-085 |
| 19-5 | Cylinder liner with suction valve R717, SMC- TSMC LP, E | 4.500 | 12 | 16 | 12 | 3112-081 |
| 19-2 | Cylinder liner with suction valve HFC/HCFC, SMC — TSMC LP, S and L | 4.100 | 12 | 16 | 12 | 3112-086 |
| 19-3 | Cylinder liner with suction valve R717. SMC — TSMC HP, S and L | 4.100 | 4 | 3112-087 | ||
| 19-6 | Cylinder liner with suction valve R717, SMC-TSMC HP, E | 4.500 | 4 | 3112-097 | ||
| 19-4 | Cylinder liner with suction valve HFC/HCFC, TSMC HP, S and L | 4.100 | 4 | 3112-088 | ||
| 19A-1 | Cylinder liner S and L | 3.500 | 12 | 16 | 16 | 3112-065 |
| 19A-2 | Cylinder liner, E | 4.000 | 12 | 16 | 16 | 3112-080 |
| 19B-1 | Unloading rings with pins, S and L | 0.400 | 12 | 16 | 16 | 3135-054 |
| 19B-2 | Unloading rings with pins, E | 0.500 | 12 | 16 | 16 | 3135-173 |
| 19C-1 | Washer-dia. 8/4,3×0.5 | 0.001 | 72 | 96 | 96 | 2114-001 |
| 19D-1 | Spring for unloading ring | 0.001 | 72 | 96 | 96 | 2142-034 |
| 19E-1 | Tension spring — 342 mm | 0.015 | 12 | 16 | 16 | 2142-048 |
| 19F-1 | Ring plate for suction valve | 0.035 | 12 | 16 | 16 | 3131-021 |
| 19G-1 | Valve spring | 0.001 | 72 | 96 | 96 | 2141-047 |
| 19H-1 | Suction valve retaining plate R717 | 1.400 | 12 | 16 | 16 | 3132-083 |
| 19H-2 | Suction valve retaining plate R12/R22 | 1.400 | 12 | 16 | 16 | 3132-084 |
| 19J-1 | Guide ring for discharge valve | 0.450 | 12 | 16 | 16 | 3134-008 |
| 19K-1 | Gasket for cylinder liner — 0,5 mm | 0-005 | 12 | 16 | 16 | 2356-111 |
| 19K-2 | Gasket for cylinder liner — 0,8 mm | 0.006 | 12 | 16 | 16 | 2356-233 |
| 19M-1 | O-ring 107,55 x 3,53*) TSMC HP | 0.002 | 4 | 1331-085 | ||
| 19N-1 | Socket cap screw M6 x 30 | 0.010 | 72 | 96 | 96 | 1413-343 |
| 19T-1 | Gasket — dia. 163/141 x 0,2 mm | 0.001 | 12 | 16 | 13 | 2353-140 |
| Discharge valve**) | ||||||
| 20-1 | Disharge valve — R717 — HP | 1.200 | 12 | 16 | 4 | 3136-089 |
| 20-2 | Disharge valve — R717 — LP | 1.200 | 12 | 16 | 12 | 3136-087 |
| 20-3 | Disharge valve — HFC/HCFC — HP | 1.200 | 12 | 16 | 4 | 3136-088 |
| 20-4 | Disharge valve — HFC/HCFC — LP | 1.200 | 12 | 16 | 12 | 3136-086 |
| 20-5 | Disharge valve — HFC/HCFC — VHP | 1.200 | 12 | 16 | 3136-085 | |
| 20A-1 | Disharge valve seat | 0.250 | 12 | 16 | 16 | 3133-027 |
| 20B-1 | Retaining plate — R717 — HP | 1.000 | 12 | 16 | 4 | 3132-092 |
| 20B-2 | Retaining plate — R717 — LP | 1.000 | 16 | 12 | 3132-090 | |
| 20B-3 | Retaining plate — HFC/HCFC — HP | 1.000 | 12 | 16 | 4 | 3132-093 |
| 20B-4 | Retaining plate — HFC/HCFC — LP | 1.000 | 12 | 16 | 12 | 3132-091 |
| 20B-5 | Retaining plateHFC/HCFC — VHP | 1.000 | 12 | 16 | 3132-094 | |
| 20C-1 | Ring plate | 0.030 | 12 | 16 | 16 | 3131-015 |
| 20D-1 | Special screw M12 x 60 | 0.055 | 12 | 16 | 16 | 1413-121 |
| 20E-1 | Nut M12 x 1,25 | 0.015 | 24 | 32 | 32 | 1432-075 |
| 20F-1 | Spring guide | 0.015 | 12 | 16 | 16 | 2145-008 |
| 20G-1 | Valve spring — R717-HP | 0.001 | 96 | 128 | 32 | 2141-047 |
| 20G-1 | Valve spring — R717 — LP | 0.001 | 72 | 96 | 72 | 2141-047 |
| 20G-1 | Valve spring — HFC/HCFC — HP | 0.001 | 144 | 192 | 48 | 2141-047 |
| 20G-1 | Valve spring — HFC/HCFC — LP | 0.001 | 72 | 96 | 72 | 2141-047 |
| 20G-1 | Valve spring — HFC/HCFC — VHP | 0.001 | 192 | 256 | 2141-047 | |
| **) Compressors are fitted with disharge valves depending on the working conditions. | ||||||
| The valve is selected on the bisis of the refrigerant and the condensing/intermediate | ||||||
| pressure temperature of the plant, indicated in the table in °C. | ||||||
| For inst. R22 at TC=53°C=>VHP disharge valve. | ||||||
| Refri-gerant | Conditions | Valve type | ||||
| R717 | TC < 15°C | LP | ||||
| TC > 15°C | HP | |||||
| HFC/ HCFC | TC < 15°C | LP | ||||
| 45°C R404A-R507 15°C ≤ TC< 50°CR22 70°CR134a | HP | |||||
| 45°C R404A-R507 TC≥ TC< 50°CR22 70°CR134a | VHP | |||||
| Pos- | Designation | Weight each in kg | Number each compressor | Part No | ||
| SMC 112 | SMC 116 | TSMC 116 | ||||
| Spring for safety head | ||||||
| 21-1 | Spring | 0.400 | 12 | 16 | 16 | 2142-060 |
| Oil pressure valve | ||||||
| 22A-1 | Oil pressure valve, complete | 0.450 | 1 | 1 | 1 | 3142-150 |
| 22B-1 | Gasket 90 x 44 x 1 | 0.001 | 1 | 1 | 1 | 2354-075 |
| 22C-1 | Hexagon head screw M12 x 35 | 0.040 | 2 | 2 | 2 | 1424-216 |
| Oil charging valve | ||||||
| 23A-1 | Oil charging valve, complete | 0.300 | 1 | 1 | 1 | 2412-585 |
| 23B-1 | Threaded reducing nipple | 0.155 | 1 | 1 | 1 | 2311-059 |
| 23C-1 | Socket | 0.075 | 1 | 1 | 1 | 2313-035 |
| 23D-1 | Gasket | 0.001 | 1 | 1 | 1 | 2356-123 |
| 23E-1 | Gasket | 0.001 | 1 | 1 | 1 | 2356-140 |
| 23F-1 | Gasket | 0.001 | 1 | 1 | 1 | 2356-283 |
| 23G-1 | Nut | 0.060 | 1 | 1 | 1 | 2313-027 |
| By-pass valves | ||||||
| 24-1 | By-pass valve dia. 28 12 bar | 3.600 | 2 | 3137-018 | ||
| 24-2 | By-pass valve dia. 28 22 bar | 3.600 | 2 | 2 | 1 | 3137-007 |
| 24-3 | By-pass valve dia. 28 24 bar | 3.600 | 2 | 2 | 1 | 3137-009 |
| 24B-1 | O-ring for cylinder *) | 0.002 | 2 | 2 | 3 | 1331-067 |
| 24C-1 | O-ring for cover *) | 0.002 | 8 | 8 | 3 | 1331-071 |
| 24D-1 | Hexagon head screw M8 x 25 | 0.015 | 8 | 1424-168 | ||
| 24D-2 | Hexagon head screw M8 x 50 | 0.025 | 8 | 8 | 4 | 1424-173 |
| 24E-1 | Spring washer dia. 14,2/8,2 x 2 | 0.002 | 12 | 1437-023 | ||
| 24F-2 | Intermediate piece | 1 | 2469-002 | |||
| Pos. | Designation | Weight each in kg | Valve dim. | Number each comprassor | Part no. | ||
| SMC 112 | SMC 116 | SMC 116 | |||||
| Stop valves | |||||||
| 25-3 | Complete valve, disharge HP | 65 | 1 | 2414-069 | |||
| 25-4 | Complete valve, inlet HP | 80 | 1 | 2411-263 | |||
| 25-5 | Complete valve, disharge LP | 100 | 1 | 1 | 1 | 2414-070 | |
| 25-6 | Complete valve, inlet LP | 125 | 1 | 1 | 1 | 2414-048 | |
| 25A-3 | Valve housing | 65 | 1 | 2432-159 | |||
| 25A-4 | Valve housing | 3.200 | 80 | 1 | 2432-143 | ||
| 25A-5 | Valve housing | 100 | 1 | 1 | 1 | 2432-160 | |
| 25A-6 | Valve housing | 125 | 1 | 1 | 1 | 2432-110 | |
| 25B-3 | Valve bonnet | 1.740 | 65 | 1 | 2433-028 | ||
| 25B-4 | Valve bonnet | 3.200 | 80 | 1 | 2433-029 | ||
| 25B-5 | Valve bonnet | 4.500 | 100 | 1 | 1 | 1 | 2433-030 |
| 25B-6 | Valve bonnet | 8.700 | 125 | 1 | 1 | 1 | 2433-008 |
| 25C-3 | Front part for cone | 0.095 | 65 | 1 | 1 | 2444-090 | |
| 25C-4 | Front part for cone | 0.028 | 80 | 1 | 1 | 2444-092 | |
| 25C-5 | Front part for cone | 0.520 | 100 | 1 | 1 | 1 | 2444-094 |
| 25C-6 | Front part for cone | 0.520 | 125 | 1 | 1 | 1 | 2444-005 |
| 25D-3 | Rear part for cone | 0.185 | 65 | 1 | 1 | 2444-091 | |
| 25D-4 | Rear part for cone | 0.440 | 80 | 1 | 1 | 2444-093 | |
| 25D-5 | Rear part for cone | 1.000 | 100 | 1 | 1 | 1 | 2444-095 |
| 25D-6 | Rear part for cone | 1.650 | 125 | 1 | 1 | 1 | 2444-013 |
| 25E-3 | Screw for valve cone | 0.020 | 65 | 1 | 2444-017 | ||
| 25E-4 | Screw for valve cone | 0.120 | 80 | 1 | 2444-018 | ||
| 25E-5 | Screw for valve cone | 0.120 | 100 | 1 | 1 | 1 | 2444-018 |
| 25E-6 | Screw for valve cone | 0.120 | 125 | 1 | 1 | 1 | 2444-018 |
| 25F-3 | Gasket for screw dia. 31/24 x 1,5 | 0.001 | 65 | 1 | 2356-138 | ||
| 25F-4 | Gasket for screw dia. 34/27 x 1,5 | 0.001 | 80 | 1 | 2356-141 | ||
| 25F-5 | Gasket for screw dia. 34/27 x 1,5 | 0.001 | 100 | 1 | 1 | 1 | 2356-141 |
| 25F-6 | Gasket for screw dia. 34/27 x 1,5 | 0.001 | 125 | 1 | 1 | 1 | 2356-141 |
| 25G-3 | Threaded connection | 0.180 | 65 | 1 | 2445-053 | ||
| 25G-4 | Threaded connection | 0.340 | 80 | 1 | 2445-060 | ||
| 25G-5 | Threaded connection | 0.400 | 100 | 1 | 1 | 1 | 2445-061 |
| 25G-6 | Threaded connection | 0.650 | 125 | 1 | 1 | 1 | 2445-009 |
| 25H-3 | Sealing ring dia. 62/45 x 3 | 0.004 | 65 | 1 | 2354-003 | ||
| 25H-4 | Sealing ring dia. 85/66 x 3 | 0.015 | 80 | 1 | 2354-115 | ||
| 25H-5 | Sealing ring dia. 110/91 x 3 | 0.020 | 100 | 1 | 1 | 1 | 2354-117 |
| 25H-6 | Sealing ring dia. 133/110 x 3 | 0.030 | 125 | 1 | 1 | 1 | 2354-118 |
| 25J-3 | Gasket for bonnet dia. 72,39 x 5,33 | 0.010 | 65 | 1 | 1331-154 | ||
| 25J-4 | Gasket for bonnet dia. 94,62 x 5,33 | 0.015 | 80 | 1 | 1331-161 | ||
| 25J-5 | Gasket for bonnet dia. 116,84 x 7 | 0.020 | 100 | 1 | 1 | 1 | 1331-198 |
| 25J-6 | Gasket for bonnet dia. 167,5/148 x 2 | 0.003 | 125 | 1 | 1 | 1 | 1331-112 |
| 25K-3 | Spindle | 0.250 | 65 | 1 | 2442-023 | ||
| 25K-4 | Spindle | 0.420 | 80 | 1 | 2442-030 | ||
| 25K-5 | Spindle | 0.480 | 100 | 1 | 1 | 1 | 2442-028 |
| 25K-6 | Spindle | 0.700 | 125 | 1 | 1 | 1 | 2442-025 |
| 25L-3 | Lock washer for spindle | 0.010 | 65 | 1 | 2445-019 | ||
| 25L-4 | Lock washer for spindle | 0.015 | 80 | 1 | 2445-020 | ||
| 25L-5 | Lock washer for spindle | 0.015 | 100 | 1 | 1 | 1 | 2445-020 |
| 25L-6 | Lock washer for spindle | 0.015 | 125 | 1 | 1 | 1 | 2445-020 |
| 25M-3 | Packing gland Compl. with o-rings | 0.120 | 65 | 1 | 2452-073 | ||
| 25M-4 | Packing gland Compl. with o-rings | 0.250 | 80 | 1 | 2452-004 | ||
| 25M-5 | Packing gland Compl. with o-rings | 0.250 | 100 | 1 | 1 | 1 | 2452-004 |
| 25M-6 | Packing gland Compl. with o-rings | 0.250 | 125 | 1 | 1 | 1 | 2452-004 |
| 25N-3 | Guide pin | 0.002 | 65 | 1 | 1445-085 | ||
| 25N-4 | Guide pin | 0.002 | 80 | 1 | 1445-085 | ||
| 25N-5 | Guide pin | 0.002 | 100 | 1 | 1 | 1 | 1445-085 |
| 25N-6 | Guide screw | 0.006 | 125 | 1 | 1 | 1 | 2111-035 |
| 25P-3 | O-ring dia. 21,8×3,5*) | 0.002 | 65 | 1 | 1331-020 | ||
| 25P-4 | O-ring dia. 28,2 x 3,5*) | 0.002 | 80 | 1 | 1331-024 | ||
| 25P-4 | O-ring dia. 28,2 x 3,5*) | 0.002 | 100 | 1 | 1 | 1 | 1331-024 |
| 25P-6 | O-ring dia. 28,2 x 3,5*) | 0.002 | 125 | 1 | 1 | 1 | 1331-024 |
| 25Q-3 | Nylon washer dia. 39,5/28 x 1,5 | 0.001 | 65 | 1 | 2354-018 | ||
| 25Q-4 | Nylon washer dia. 34/22 x 1,5 | 0.002 | 80 | 1 | 2354-017 | ||
| 25Q-5 | Nylon washer dia. 34/22 x 1,5 | 0.002 | 100 | 1 | 1 | 1 | 2354-017 |
| 25Q-6 | Nylon washer dia, 34/22 x 1,5 | 0.002 | 125 | 1 | 1 | 1 | 2354-017 |
| 25R-3 | O-ring dia. 17,12×2,62*) | 0.001 | 65 | 2 | 2 | 1331-016 | |
| 25R-4 | O-ring dia. 21,8×3,5 | 0.002 | 80 | 2 | 2 | 1331-020 | |
| 25R-5 | O-ring dia. 21,8×3,5 | 0.002 | 100 | 2 | 2 | 2 | 1331-020 |
| 25R-6 | O-ring dia. 21,8×3,5 | 0.002 | 125 | 2 | 2 | 2 | 1331-020 |
| 25S-3 | Hand wheel dia. 120 | 0.160 | 65 | 1 | 1365-036 | ||
| 25S-4 | Hand wheel dia. 140 | 0.400 | 80 | 1 | 1365-033 | ||
| 25S-5 | Hand wheel dia. 180 | 0.800 | 100 | 1 | 1 | 1 | 1365-035 |
| 25S-6 | Hand wheel dia. 180 | 0.800 | 125 | 1 | 1 | 1 | 1365-035 |
| 25T-3 | Screw for hand wheel M5 x 10 | 0.002 | 65 | 1 | 1424-140 | ||
| 25T-4 | Screw for hand wheel M8 x 16 | 0.010 | 80 | 1 | 1424-166 | ||
| 25T-5 | Screw for hand wheel M8 x 16 | 0.010 | 100 | 1 | 1 | 1 | 1424-166 |
| 25T-6 | Screw for hand wheel M8 x 16 | 0.010 | 125 | 1 | 1 | 1 | 1424-166 |
| 25U-3 | Washer for hand wheel | 0.001 | 65 | 1 | 1436-024 | ||
| 25U-4 | Washer for hand wheel | 0.003 | 80 | 1 | 1436-026 | ||
| 25U-5 | Washer for hand wheel | 0.003 | 100 | 1 | 1 | 1 | 1436-026 |
| 25U-6 | Washer for hand wheel | 0.003 | 125 | 1 | 1 | 1 | 1436-026 |
| 25V-6 | Spring washer dia. 14,2/8,2 x 2 | 0.002 | 125 | 1 | 1437-023 | ||
| 25Y-3 | Gasket for welding nipple dia. 90/68 x 2 | 0.015 | 65 | 1 | 2356-087 | ||
| 25Y-4 | Gasket for welding nipple dia. 130/95×2 | 0.025 | 100 | 1 | 1 | 1 | 2356-104 |
| 25Y-6 | Gasket for welding nipple dia. 155/125×2 | 0.025 | 125 | 1 | 1 | 1 | 2356-109 |
| 25Z-3 | Screw valve/compr. M14 x 45 | 0.050 | 65 | 4 | 1424-242 | ||
| 25Z-4 | Screw valve/compr. M16 x 45 | 0.095 | 100 | 4 | 4 | 4 | 1424-102 |
| 25Z-6 | Screw valve/compr. M16 x 100 | 0.170 | 125 | 6 | 6 | 6 | 1424-268 |
| 25AC-3 | Counter flange | 65 | 1 | 2344-019 | |||
| 25AC-4 | Counter flange | 100 | 1 | 1 | 1 | 2344-020 | |
| 25AC-6 | Counter flange | 3.600 | 125 | 1 | 1 | 1 | 2344-006 |
| 25AD-3 | Welding nipple dia. 65 | 65 | 1 | 2322-103 | |||
| 25AD-4 | Welding nipple dia. 100 | 100 | 1 | 1 | 1 | 2322-108 | |
| 25AD-6 | Welding nipple dia. 125 | 125 | 1 | 1 | 1 | 2322-110 | |
| 25AF-3 | Threaded plug 3/4″ BSP | 65 | 1 | 2314-065 | |||
| 25AF-4 | Threaded plug 3/4″ BSP | 100 | 1 | 1 | 1 | 2314-065 | |
| 25AG-3 | Gasket for valve/compr. | 0.016 | 65 | 1 | 2354-105 | ||
| 25AG-4 | Gasket for valve/compr. | 0.020 | 100 | 1 | 1 | 1 | 2354-106 |
| 25AG-6 | Gasket for valve/compr. | 0.040 | 125 | 1 | 1 | 1 | 2354-080 |
| 25AH-3 | Gasket for plug | 0.002 | 65 | 1 | 2356-139 | ||
| 25AH-4 | Gasket for plug | 0.002 | 100 | 1 | 1 | 1 | 2356-139 |
| 25AJ-3 | Screw bonnet/valve M10 x 25 | 65 | 8 | 1424-191 | |||
| 25AJ-4 | Screw bonnet/valve M10 x 25 | 80 | 8 | 1424-191 | |||
| 25AJ-5 | Screw bonnet/valve M20 x 30 | 0.040 | 100 | 8 | 8 | 8 | 1424-215 |
| 25AJ-6 | Screw bonnet/valve M16 x 60 | 0.100 | 125 | 6 | 6 | 6 | 1424-260 |
| 25AK-3 | Screw for counter flange M10 x 40 | 0.030 | 65 | 6 | 1424-194 | ||
| 25AK-4 | Screw for counter flange M12 x 50 | 0.050 | 100 | 6 | 1424-219 | ||
| 25AK-4 | Screw for counter flange M16 x 65 | 0.100 | 125 | 6 | 6 | 6 | 1424-106 |
| Pos. | Designation | Weight each in kg | Number each compressor | Part No | ||
| SMC 112 | SMC 116 | TSMC 116 | ||||
| Pressure gauges Suction and pressure gauge | ||||||
| 30A-1 | R717 | 1.640 | 1 | 1 | 1 | 1541-108 |
| 30A-2 | R12,R22 and R502 | 1.620 | 1 | 1 | 1 | 1541-232 |
| 30A-3 | R22,R134a and R404A | 1.620 | 1 | 1 | 1 | 1541-074 |
| 30B-1 | Nozzle and gasket dia. 14/0,8 x 1,5 | 0.001 | 1 | 1 | 1 | 3146-013 |
| 30C-1 | Gasket dia. 11/4×1,5 | 0.001 | 1 | 1 | 1 | 2356-119 |
| SMC: discharge pressure gauge | ||||||
| 31A-1 | R717 | 1.380 | 1 | 1 | 1 | 1541-029 |
| 31A-2 | R12,R22 and R502 | 1.400 | 1 | 1 | 1 | 1541-160 |
| 31A-3 | R22,R134a and R404A | 1.400 | 1 | 1 | 1 | 1541-075 |
| 31B-1 | Nozzle and gasket dia. 14/0,8 x 1,5 | 0.001 | 1 | 1 | 1 | 3146-013 |
| TSMC: disharge pressure gauge | ||||||
| 31A-3 | R717 | 1.600 | 1 | 1541-101 | ||
| 31A-4 | R12,R22 and R502 | 1.660 | 1 | 1541-161 | ||
| 31A-5 | R22,R134a and R404A | 1.660 | 1 | 1541-076 | ||
| 31B-1 | Nozzle and gasket dia. 14/0,8 x 1,5 | 0.001 | 2 | 3146-013 | ||
| 31C-1 | Screws for gauges M4 x 20 | 6 | 6 | 6 | 1412-350 | |
| Oil filter | ||||||
| 33-1 | Oil filter complete | 1 | 1 | 1 | 4524-039 | |
| 33A-1 | Filter element | 1 | 1 | 1 | 1517-125 | |
| 33B-1 | Gasket | 2 | 2 | 2 | 2356-202 | |
| 33C-1 | End cover | 1 | 1 | 1 | 3422-150 | |
| 33D-1 | Rod for filter | 1 | 1 | 1 | 2112-145 | |
| 33E-1 | Shield for oil filter | 1 | 1 | 1 | 2158-209 | |
| 33F-1 | Bracket with connection | 1 | 1 | 1 | 3422-152 | |
| 33G-1 | Distance piece | 1 | 1 | 1 | 2212-136 | |
| 33H-1 | Rubber gasket | 1 | 1 | 1 | 1334-012 | |
| 33J-1 | Magnet | 3 | 3 | 3 | 1517-022 | |
| 33K-1 | Iron ring | 3 | 3 | 3 | 2114-038 | |
| 33L-1 | Washer dia. 17/8,4 | 1 | 1 | 1 | 1436-034 | |
| 33M-1 | NutM8 | 1 | 1 | 1 | 1433-073 | |
| 33N-1 | Washer dia. 24/13 | 1 | 1 | 1 | 1436-036 | |
| 330-1 | Nut M12 | 1 | 1 | 1 | 1433-075 | |
| 33P-1 | O-ring *) | 1 | 1 | 1 | 1331-009 | |
| 33Q-1 | O-ring *) | 1 | 1 | 1 | 1331-008 | |
| 33R-1 | Cutting ring joint | 1 | 1 | 1 | 1349-131 | |
| Suction filter | ||||||
| 34A-1 | Suction filter open, complete | 0.660 | 2 | 2 | 1 | 3425-093 |
| 34A-2 | Suction filter closed, complete | 0.870 | 1 | 3425-095 | ||
| 34B-1 | Filter bag | 0.035 | 2 | 2 | 2 | 3425-096 |
| 34C-1 | Inset for filter bag | 0.040 | 2 | 2 | 2 | 3424-061 |
| 34D-1 | O-ring PRP 346 -104,1 x 5,33 *) | 0.012 | 2 | 2 | 3 | 1331-164 |
| 34E-1 | Coverfor suction filter | 4.160 | 2 | 2 | 1 | 3422-114 |
| 34F-1 | O-ring PRP 248 -120,24 x 3,53 *) | 0.006 | 2 | 2 | 1 | 1331-089 |
| 34G-1 | Hexagon head screw M 16 x 45 | 0.095 | 8 | 8 | 4 | 1424-102 |
| 34H-1 | Spring washer dia. 26,2/16,2 x 3,5 | 0.004 | 8 | 8 | 4 | 1437-027 |
| Discharge pipe for oil filter | ||||||
| 38A-1 | Discharge pipe for oil pump | 0.500 | 1 | 1 | 1 | 3141-110 |
| 38B-1 | Inside pipe connection to control system (compr. without oil cooler) | 0.090 | 1 | 1 | 1 | 3141-162 |
| 38B-2 | Inside pipe connection to control system (compr. with OSSI oil cooler R717) | 0.090 | 1 | 1 | 1 | 3141-163 |
| 28B-3 | inside pipe connection to control system (compr. with HE8 oil cooler HCFC) | 0.090 | 1 | 1 | 1 | 3141-164 |
| 38C-1 | Connection for disharge pipe -SMC112 | 0.120 | 1 | 2333-024 | ||
| 38C-3 | Connection for disharge pipe -SMC116 and TSMC116 | 0.180 | 1 | 1 | 2333-026 | |
| 38D-1 | O-ring PRP 212 — 21,80 x 3,53*) | 0.002 | 2 | 2 | 2 | 1331-020 |
| 38E-1 | O-ring PRP 321 — 29,51 x 5,33*) | 0.004 | 1 | 1 | 1 | 1331-039 |
| 38F-1 | Gasket dia. 27/21 x1,5 | 0.001 | 1 | 1 | 1 | 2356-133 |
| 38G-1 | O-ring dia. 26,58 x 3,5′) | 0.002 | 1 | 1 | 1 | 1331-023 |
| 38H-1 | Discharge pipe for oil | 0.140 | 1 | 1 | 1 | 3141-114 |
| 38J-1 | Support for oil pipe | 0.130 | 1 | 1 | 1 | 2213-150 |
| 38K-1 | Hexagon head screw M10 x 16 | 0.012 | 2 | 2 | 2 | 1424-189 |
| 38L-1 | Spring washer dia. 17,2/10,2 x 2,2 | 0.002 | 2 | 2 | 2 | 1437-033 |
| Analogous control and safety | ||||||
| equipment | ||||||
| 39A-1 | Gauge panel | 0.070 | 1 | 1 | 1 | 3146-042 |
| 39B-1 | Socket cap screw M10 x 60 | 0.045 | 2 | 2 | 2 | 1413-382 |
| 39C-1 | Console | 1 | 1 | 1 | 2213-142 | |
| 39D-1 | Bar for controls (4 controls) | 1 | 1 | 1 | 2213-143 | |
| 39D-2 | Bar for controls (5 controls) | 1 | 1 | 1 | 2213-144 | |
| 39D-3 | Bar for controls (6 controls) | 1 | 1 | 1 | 2213-145 | |
| 39D-4 | Bar for controls (7 controls) | 1 | 1 | 1 | 2213-154 | |
| 39D-5 | Bar for controls (US, SMC) | 1 | 1 | 1 | 2213-368 | |
| 39D-6 | Bar for controls (US, TSMC) | 2213-369 | ||||
| 39E-1 | Hexagon head screw M6 x 12 | 2 | 2 | 2 | 1424-150 | |
| 39F-1 | Spring washer dia. 11/6 | 2 | 2 | 2 | 1437-022 | |
| 39G-1 | Socket cap screw M4 x 6 | 1412-200 | ||||
| 39H-1 | Spring washer dia. 7/4 | 1437-020 | ||||
| 39J-1 | Socket cap screw M5 x 10 | 4 | 4 | 4 | 1413-330 | |
| 39K-1 | Spring washer dia. 9/5 | 4 | 4 | 4 | 1437-021 | |
| 39L-1 | Console for gauge panel | 1 | 1 | 1 | 2213-149 | |
| 39M-1 | Nut M10 | 2 | 2 | 2 | 1432-064 | |
| 39N-1 | Spring washer | 2 | 2 | 2 | 1437-033 | |
| Cooling water connection See section: Water cooling of reciprocating compressor | ||||||
| 40A-1 | Set of hoses for cooling water SMC112 | 2.700 | 1 | 3185-157 | ||
| 40A-2 | Set of hoses for cooling water SMC116 | 2.820 | 1 | 1 | 3185-158 | |
| 40B-1 | Hose connection — 3/8″ — straight | 0.004 | 28 | 32 | 32 | 2334-025 |
| 40C-1 | Angle — 3/8″ | 0.009 | 17 | 17 | 17 | 1341-090 |
| 40D-1 | T-piece | 0.015 | 4 | 4 | 4 | 1341-141 |
| 40E-1 | Hose clamp | 0.015 | 28 | 32 | 32 | 1345-168 |
| 40F-1 | Cable binder | 5 | 5 | 5 | 1554-062 | |
| 40G-1 | Nipple 3/4″ — 3/8″ | 0.070 | 2 | 2 | 2 | 2312-016 |
| 40H-1 | T-piece 3/4″ — 3/4″ — 3/8″ | 0.150 | 2 | 2 | 2 | 1351-026 |
| Purge valve | ||||||
| 42A-1 | Purge valve | 0.300 | 1 | 1 | 2 | 2412-585 |
| 42B-1 | Threaded nipple | 1 | 1 | 1 | 1349-078 | |
| 42C-1 | Cutting ring | 0.135 | 1 | 1 | 2 | 1349-062 |
| 42D-1 | Nut | |||||
| 42E-1 | Nut | 0.070 | 1 | 1 | 2 | 2313-045 |
| 42F-1 | Connection pipe with collar | 0.025 | 1 | 1 | 2 | 2334-027 |
| 42G-1 | Gasket | 0.001 | 2 | 2 | 4 | 2356-123 |
| 42H-1 | Nut | 0.060 | 1 | 1 | 2 | 2313-027 |
| Pressure and temperature controls Pressure controls for R717 | ||||||
| 45A-1 | KP 5A | 0.300 | 1 | 1 | 1 | 1373-125 |
| 45B-1 | KP 15A | 0.760 | 1 | 1 | 1 | 1373-142 |
| 45C-1 | MP 55A | 1.100 | 1 | 1 | 1 | 1373-162 |
| Pressure controls for R22, R134a and R404A | ||||||
| 45D-1 | KP 5 | 0.300 | 1 | 1 | 1 | 1373-123 |
| 45E-1 | KP 15 | 0.540 | 1 | 1 | 1 | 1373-135 |
| 45F-1 | MP 55 | 1.100 | 1 | 1 | 1 | 1373-159 |
| Temperature controls: | ||||||
| 45G-1 | KP 98 | 0.720 | 1 | 1 | 1 | 1373-043 |
| 45H-1 | KP 77 | 0.350 | 1 | 1 | 1 | 1373-044 |
| 45J-1 | Phail pocket for temperature controls | 0.770 | 1 | 1 | 1 | 1377-171 |
| 45K-1 | Gasket | 1 | 1 | 1 | 2356-133 | |
| AMR 350 S coupling | ||||||
| 48A-4 | Disc pack | 1.132 | 2 | 2 | 2 | 1524-158 |
| 48B-4 | Bolt | 0.054 | 16 | 16 | 16 | 1524-166 |
| 48C-4 | Bevel washer | 0.010 | 4 | 4 | 4 | 1524-188 |
| 48D-4 | Lock nut | 0.018 | 16 | 16 | 16 | 1524-174 |
| 48E-4 | Washer | 0.008 | 16 | 16 | 16 | 1524-182 |
| Intermediate bearing | ||||||
| 49-1 | Intermediate bearing complete | 17.600 | 1 | 1 | 1 | 3113-146 |
| 49A-1 | Housing | 1 | 1 | 1 | ||
| 49B-1 | Socket cap screw M 12 x 45 DIN 912 | 0.052 | 4 | 4 | 4 | 1413-389 |
| 49C-1 | Spring washer dia. 12,2 x 20,2 | 0.002 | 4 | 4 | 4 | 1437-081 |
| 49D-1 | Guide pin dia. 5×26 | 0.002 | 2 | 2 | 2 | 1446-022 |
| 49E-1 | Half section of bearing | 0.080 | 8 | 8 | 8 | 2133-003 |
| 49E-2 | Half section of bearing for repair 0,5 mm undersize | 0.080 | 8 | 8 | 8 | 2133-004 |
| 49F-1 | Hexagon head screw M10 x 65 | 0.045 | 2 | 2 | 2 | 1424-199 |
| 49G-1 | Spring washer M10 | 0.002 | 2 | 2 | 2 | 1437-033 |
| 49H-1 | Threaded plug 3/4″ BSP | 0.065 | 2 | 2 | 2 | 2314-027 |
| 49J-1 | Gasket dia. 34/27 x 1,5 | 0.001 | 2 | 2 | 2 | 2356-140 |
| Capacity regulation | ||||||
| 50A-2 | Valve body with 2 solenoid valves without coils | 2.530 | 2 | 1 | 3143-384 | |
| 50A-3 | Vafve body with 3 solenoid valves without coils | 3.440 | 2 | 1 | 3143-385 | |
| 50A-4 | Valve body with 4 solenoid valves without coils | 3.480 | 2 | 3143-386 | ||
| 50B-1 | Coil 220/230V, 50/60 Hz, 10 W | 0.260 | 1372-537 | |||
| 50B-2 | Coil 110V, 50/60 Hz. 10W | 0.260 | 1372-538 | |||
| 50B-3 | Coil 240V, 50 Hz, 10W | 0.260 | 1372-539 | |||
| 50C | Solenoid valve | 1372-424 | ||||
| (service kit for one solenoid valve) | ||||||
| Crankcase heater | ||||||
| 57A-1 | Crankcase heater — 270 W -115 V, | 810 | 2 | 2 | 2 | 3181-034 |
| 1 1/4″ BSP | ||||||
| 57A-2 | Crankcase heater — 270 W — 230 V, | 810 | 2 | 2 | 2 | 3181-035 |
| 1 1/4″ BSP | ||||||
| 57A-3 | Crankcase heater — 270 W — 250 V, | 810 | 2 | 2 | 2 | 3181-036 |
| 1 1/4″ BSP | ||||||
| 57B-1 | Sealing ring dia. 42/49 x 6,5 | 0,022 | 2 | 2 | 2 | 1349-213 |
| 80 | Solenoide valve blok, complete with 0,6 mm orifice for oil return, excl. coil | 2.040 | 1 | 1 | 1 | 1372-179 |
| Strainer kit consist of: | 1 | 1 | 1 | 1372-089 | ||
| 80E | Strainer | |||||
| 80G | Al-gasket | |||||
| Service kit consist of: | 1 | 1 | 1 | 1372-086 | ||
| 80P | Armature tube | |||||
| 80H | Armature | |||||
| 80K | O-ring | |||||
| 80M | O-ring | |||||
| 80L | Al-gasket | |||||
| 80N | Snap fastener | |||||
| Seal kit consist of: | 1 | 1 | 1 | 1372-091 | ||
| 80G | Al-gasket | |||||
| 80K | O-ring | |||||
| 80M | O-ring | |||||
| 80L | Al-gasket | |||||
| 80Q | Al-gasket | |||||
| Orifice kit 0,6 mm consist of: | 1 | 1 | 1 | 1371-034 | ||
| 80L | Al-gasket | |||||
| 80Q | Al-gasket | |||||
| 801 | Orifice 0,6 mm | |||||
| Orifice kit 0,8 mm consist of: | 1 | 1 | 1 | 1371-035 | ||
| 80L | Al-gasket | |||||
| 80Q | Al-gasket | |||||
| 801 | Orifice 0,8 mm | |||||
| Orifice kit 1,0 mm consist of: | 1 | 1 | 1 | 1371-036 | ||
| 80L | Al-gasket | |||||
| 80Q | At-gasket | |||||
| 801 | Orifice 1,0 mm | |||||
| Orifice kit 3,3 mm (for thermopump only) consist of: | 1 | 1 | 1 | 1371-037 | ||
| 80L | Al-gasket | |||||
| 80Q | Al-gasket | |||||
| 80I | Orifice 3,3 mm | |||||
| 80J-1 | Coil 220/230V, 50/60 Hz. 10 W | 0.285 | 1372-537 | |||
| 80J-2 | Coil 110V, 50/60 Hz, 10W | 0.285 | 1372-538 | |||
| 80J-3 | Coil 240V, 50 Hz, 10W | 0.285 | 1372-539 | |||
| 80J-4 | Coil 24V, 50 Hz, 10W | 0.285 | 1372-541 | |||
| Intermediate pressure connections | ||||||
| 90A-1 | Mixing chamber with flange | 1 | 3114-070 | |||
| 90B-1 | Counter flange for mixing chamber | 1 | 3115-018 | |||
| 90C-1 | Intermediate ring | 1 | 3422-111 | |||
| 90D-1 | O-ring PRP 246 -113,9 x 3,55 *) | 1 | 1331-087 | |||
| 90E-1 | O-ring PRP 248 -120,2 x 3,5 *) | 1 | 1331-089 | |||
| 90F-1 | Hexagon head screw M16 x 50 | 8 | 1424-259 | |||
| 90G-1 | Spring washer dia. 26,2/16,2 x 3,5 | 8 | 1424-027 | |||
| 90H-1 | O-ring dia. 132,9×3,5 | 1 | 1331-093 | |||
| 90J-1 | Cap | 1 | 2312-027 | |||
| 90K-1 | Gasket dia. 18/1 Ox 1.5 | 1 | 2356-123 | |||
| Oil cooling — type HE8 S tor R22 | ||||||
| 92A-1 | Oil cooler | 1 | 1 | 1 | 4242-038 | |
| 92B-1 | Stop valve BMSL 10 | 0.300 | 1 | 1 | 1 | 1374-171 |
| 92C-1 | Thermostatic expansion valve TX 2 — 0.5 | 0.400 | 1 | 1 | 1 | 1371-305 |
| 92D-1 | Solenoid valve without coil | 0.350 | 1 | 1 | 1 | 1372-422 |
| 92N-1 | Coil 220/230V, 50/60 Hz, 10 W | 0.260 | 1372-537 | |||
| 92N-2 | Coil 110V. 50/60 Hz, 10W | 0.260 | 1372-538 | |||
| 92N-3 | Coil 240V, 50 Hz, 10W | 0.260 | 1372-539 | |||
| 92E-1 | Filter | 0.320 | 1 | 1 | 1 | 4522-002 |
| 92F-1 | Screwed connection GE 10-LR 1/4″ | 0.050 | 6 | 6 | 6 | 1349-051 |
| 92G-1 | Single banjo connector DSVW 10-LR | 0.160 | 1 | 1 | 1 | 1349-089 |
| 92H-1 | Threaded nipple | 0.110 | 1 | 1 | 1 | 2314-056 |
| 92J-1 | Threaded plug for 8/6 mm pipe | 0.015 | 2 | 2 | 2 | 2314-053 |
| 92K-1 | Gasket dia. 19/14×1,5- aluminium | 0.001 | 8 | 8 | 8 | 2356-124 |
| 92L-1 | Connection piece for 1 pipe dia. 8 mm | 0.030 | 2 | 2 | 2 | 2333-021 |
| 92M-1 | Gasket — dia. 27/21 x 1,5 — aluminium | 0.001 | 3 | 3 | 3 | 2356-133 |
| Oil cooling — type OOSI tor R717 | ||||||
| 93A-1 | Oil cooler | 1 | 1 | 1 | 4242-029 | |
| 93B-1 | Stop valve SN 6 | 1 | 1 | 1 | 2413-010 | |
| 93C-1 | Thermostatic injection TEAT 20-2 | 0.400 | 1 | 1 | 1 | 1371-240 |
| 93D-1 | Solenoid valve without coil | 0.445 | 1 | 1 | 1 | 1372-422 |
| 93N-1 | Coil 220/230V. 50/60 Hz, 10 W | 0.260 | 1372-537 | |||
| 93N-2 | Coil 110V. 50/60 Hz, 10W | 0.260 | 1372-538 | |||
| 93N-3 | Coil 240V, 50 Hz, 10W | 0.260 | 1372-539 | |||
| 93E-1 | Filter | 0.320 | 1 | 1 | 1 | 4522-002 |
| 93F-1 | Screwed connection GE 10-LR 1/4″ | 0.050 | 6 | 6 | 6 | 1349-051 |
| 93G-1 | Single banjo connector DSVW 10-LR | 0.160 | 1 | 1 | 1 | 1349-089 |
| 93H-1 | Threaded nipple | 0.110 | 1 | 1 | 1 | 2314-056 |
| 93J-1 | Threaded plug for dia. 8/6 mm pipe | 0.015 | 4 | 4 | 4 | 2314-053 |
| 93K-1 | Gasket dia. 19/14 x 1,5-alunimium | 0.001 | 8 | 8 | 8 | 2356-124 |
| 93L-1 | Connection piece for 1 pipe dia. 8 mm | 0.030 | 4 | 4 | 4 | 2333-021 |
| 93M-1 | Gasket dia. 27/21 x 1,5 — aluminium | 0.001 | 3 | 3 | 3 | 2356-133 |
| Chain drive for oil pump | ||||||
| Chain drive complete | 3141-127 | |||||
| 96A-1 | Hub for chain wheel (crankshaft) | 1 | 1 | 1 | 2126-020 | |
| 96B-1 | Hub for chain wheel (oil pump) | 1 | 1 | 1 | 2126-019 | |
| 96C-1 | Chain wheel (crankshaft) | 1 | 1 | 1 | 2126-018 | |
| 96D-1 | Chain wheel (oil pump) | 1 | 1 | 1 | 2126-017 | |
| 96E-1 | Chain | 1 | 1 | 1 | 1521-102 | |
| 96F-1 | Hexagon head screw | 5 | 5 | 5 | 1424-150 | |
| 96G-1 | Spring washer | 5 | 5 | 5 | 1437-022 | |
| 96H-1 | Shield for oil | 1 | 1 | 1 | 3141-128 | |
| 98 | Thermo pump | |||||
| 98A-1 | Side cover for thermo pump | 2 | 2 | 2 | 3113-145 | |
| 98B-1 | Monitor box | 2 | 2 | 2 | 1553-215 | |
| Alien screw M4x 16 | 4 | 4 | 4 | 1412-204 | ||
| Spring washer dia. 4 | 4 | 4 | 4 | 1437-020 | ||
| 98C-1 | Level indicator | 4 | 4 | 4 | 3185-038 | |
| 98D-1 | Outer part for level indicator | 4 | 4 | 4 | 3185-034 | |
| 98E-1 | Washer dia. 20/13×1,5 | 4 | 4 | 4 | 2356-125 | |
| 98F-1 | Rubber cap | 4 | 4 | 4 | 1554-194 | |
| 98G-1 | Solenoid valve without coil | 1 | 1 | 1 | 1372-422 | |
| 98H-1 | Solenoid valve without coil | 2 | 2 | 2 | 1372-423 | |
| 98J-1 | Coil 220/230V, 50/60 Hz, 10 W | 0.260 | 1372-537 | |||
| 98J-2 | Coil 110V, 50/60 Hz, 10W | 0.260 | 1372-538 | |||
| 98J-3 | Coil 240V, 50 Hz, 10W | 0.260 | 1372-539 | |||
| 98K-1 | Check valve | 4 | 4 | 2 | 1364-008 | |
| Straght joint 10 mm BSP | 9 | 10 | 6 | 1349-051 | ||
| Socket 10mm BSP | 8 | 8 | 5 | 1349-101 | ||
| T-joint 10mm | 7 | 9 | 3 | 1349-041 | ||
| Strap for stop valve | 2 | 2 | 1 | 2212-059 | ||
| Cable binder no. 10 | 2 | 2 | 1 | 1554-054 | ||
| Alien screw M4x 12 | 4 | 4 | 2 | 1412-203 | ||
| Nut M4 | 4 | 4 | 2 | 1432-035 | ||
| 98L-1 | Washer dia. 29/21 x 1,5 | 4 | 4 | 2 | 2356-136 | |
| 98M-1 | VA-joint with nozzle 1,2 mm | 7 | 9 | 3 | 2314-097 | |
| Angle joint | 3 | 6 | 4 | 1349-033 | ||
| Angle swivel joint 8 mm | 5 | 2 | 5 | 1349-087 | ||
| Angle swivel joint 10 mm | 3 | 6 | 2 | 1349-089 | ||
| Bushing 1/4″ x 1/2″ RG | 1 | 1 | 1 | 2312-013 | ||
| Straight joint 8 mm BSP | 2 | 2 | 1349-050 | |||
| Threaded nipple | 1 | 1 | 1 | 2314-056 | ||
| Threaded nipple | 1 | 1 | 1 | 2314-056 | ||
| Gasket dia. 27/21 x1,5Al | 2 | 2 | 2 | 2356-133 | ||
| Angle joint 10 mm | 1 | 1349-112 | ||||
| Connecting piece 8 mm | 1 | 1 | 2333-021 | |||
| Threaded plug | 1 | 1 | 2314-053 | |||
| Gasket dia. 19/14×1,5 | 2 | 2 | 2356-124 | |||
| Strap | 4 | 4 | 1 | 1377-117 | ||
| Spring washer for M5 | 1 | 1437-021 | ||||
| Allen screw M5x 10 | 1 | 1413-330 | ||||
| Hexagon set screw M6 x 12 | 2 | 2 | 1424-150 | |||
| Nut M6 | 2 | 2 | 1432-061 | |||
| Spring washer for M6 | 4 | 4 | 1437-022 | |||
| Gasket dia. 19/14×4 | 2 | 3 | 3 | 2356-283 | ||
| 98N-1 | Filter | 2 | 2 | 1 | 4522-002 | |
| 98P-1 | Stop valve | 2 | 2 | 1 | 2412-277 | |
| 98Q-1 | Cooling cover | 2 | 2 | 1 | 3113-143 | |
| 98R-1 | Gasket for side cover | 2 | 2 | 1 | 2353-151 | |
| 98S-1 | Hexagon head screw M14 x 80 | 32 | 32 | 16 | 1424-081 | |
| 98T-1 | Oil cooler OSSI | 1 | 1 | 1 | 4242-029 | |
| Socket 1/4″ | 1 | 1 | 1 | 1349-101 | ||
| 98V | Solenoid valve without coil | 2 | 2 | 1 | 1372-453 | |
| 98X | PT100 sensor | 2 | 2 | 1 | 1373-253 | |
| 98Y | Stop valve | 2 | 2 | 1 | 2412-277 | |
| 98Z | Non-return valve | 2 | 2 | 1 | 1364-022 | |
| 98AA | Screw joint | 2 | 2 | 1 | 2314-105 | |
| UNISAB | ||||||
| 99A-1 | Support for UNISAB | 1 | 1 | 1 | 2213-500 | |
| 99B-3 | Distance washers | 4 | 4 | 4 | 2212-130 | |
| 99C-1 | Screw for support M 10 x 20 | 2 | 2 | 2 | 1424-190 | |
| 99D-1 | Screw for UNISAB M6 x 20 | 4 | 4 | 4 | 1424-152 | |
| 99E-1 | Washers dia. 22/7 x 1,5 | 4 | 4 | 4 | 1436-025 | |
| Tools set for compressor SMC 104-116 Mk3 & TSMC 108-116 MR3 — type S-L-E | ||||||
| Line no. A600 = Normal set, tools set no 3183-109 | ||||||
| Line no. A601 = Extended set. tools set no 3183-110 | ||||||
| Line no. A602A = Tools for coupling (SMC 104-108) | ||||||
| Line no. A602B = Tools for coupling (SMC 112-116) | ||||||
| Line no. A603 = Tools for alignment of coupling |
| Pos.No | Designation | Dimension | Part No. | Line No. | ||||
| A 600 | A 601 | A 602 | A603 | |||||
| A | B | |||||||
| 1-1 | Clamp with screw, compr. type S and L | 3183-144 | 4 | 4 | ||||
| 1-2 | Clamp with screw, compr. type E | 3183-145 | 4 | 4 | ||||
| 2 | Tools for shaft seal | 3183-139 | 1 | 1 | ||||
| 3 | Tommy screw for cylinder liner | 3183-041 | 2 | 2 | ||||
| 4 | Theaded plug for unloading cylinder | 3/8″ BSP | 2314-017 | 2 | 2 | |||
| 5 | Supporting plate for pistons | 3183-115 | 8 | 8 | ||||
| 6 | Spanner for heating cartridge | NV55 | 3183-060 | 1 | 1 | |||
| 7 | Trigger for coupling or belt pulley | 3183-059 | 1 | 1 | ||||
| 8 | Adjusting jig for coupling | 3183-105 | 1 | |||||
| 9-1 | Wrench for cylinder screw | NV 4 | 1 | |||||
| 9-2 | Wrench for cylinder screw | NV 5 | 1 | |||||
| 9-3 | Wrench for cylinder screw | NV 8 | 1 | |||||
| 9-4 | Wrench for cylinder screw | NV10 | 1 | |||||
| 9-5 | Special wrench for shaft seal | NV 4 | 1612-392 | 1 | 1 | |||
| 10-1 | Retaining-ring plier | J21/G | 1 | |||||
| 10-2 | Retaining-ring plier | A11/G | 1 | |||||
| 11-1 | Open end and ring spanner | NV10 | 1 | |||||
| 11-2 | Open end and ring spanner | NV17 | 1 | |||||
| 11-3 | Open end and ring spanner | NV19 | 1 | |||||
| 11-4 | Open end and ring spanner | NV22 | 1 | |||||
| 11-5 | Open end and ring spanner | NV24 | 1 | |||||
| 11-6 | Open end and ring spanner | NV27 | 1 | |||||
| 13-1 | Socket wrench | NV10 | 1 | |||||
| 13-2 | Socket wrench | NV13 | 1 | |||||
| 13-3 | Socket wrench | NV17 | 1 | |||||
| 13-4 | Socket wrench | NV19 | 1 | |||||
| 13-5 | Socket wrench | NV22 | 1 | |||||
| 13-6 | Socket wrench | NV24 | 1 | 1 | 1 | |||
| 13-7 | Socket wrench | NV27 | 1 | |||||
| 13-8 | Socket wrench | NV30 | 1 | |||||
| 13-9 | Socket wrench | NV32 | 1 | |||||
| 13-10 | Socket wrench | NV9/16″ | 1 | |||||
| 13-11 | Socket wrench | NV 3/4″ | 1 | 1 | ||||
| 13-12 | Socket wrench | NV11/16″ | 1 | 1 | ||||
| 14 | Ratchet handle | 1 | ||||||
| 15 | Speed handle | 1 | ||||||
| 16 | Universal joint for socket wrench | 1 | ||||||
| 17-1 | Extension rod for socket wrench | 1 | ||||||
| 17-2 | Extension rod for socket wrench | 1 | ||||||
| 19-1 | Torque wrench 15-90 Nm | 1 | ||||||
| 19-2 | Torque wrench 40-200 Nm | 1 | 1 | 1 | ||||
| 20 | Coupler for torque wrench 1/2 | 2 | 1 | 1 | ||||
| 21-1 | Open spanner for torque wrench | NV11/16″ | 1 | 1 | ||||
| 21-2 | Open spanner for torque wrench | NV 3/4″ | 1 | 1 | ||||
| 22 | Feeler gauge | 1 | ||||||
По вопросам наличия запчастей, возможности ремонта или сервисного обслуживания компрессора Mycom обращайтесь по телефону в Санкт-Петербурге +7(921) 55-77-130 или по электронной почте info@grs-spb.ru